PDA

View Full Version : i have 89 sc that i may part out but 1st i want to see who wants stuff



super89
10-16-2005, 12:09 PM
list ur part(s) that you want and how much you will pay for the part i have like everything and it is a 5 speed(trans works great) sc builds 14-15 pounds of boost

this car did run unitil 4 or 5 days ago when the balancer and crank sensor broke. it has 100,000 on car and 65,000 on a rebuilt 91 sc motor and i just put a 92 sc trans and drive shaft put in new duralast clutch and resurfaced the flywheel. in it i have new fenders, hood and front bumper that i put on.interor is in good shape beside the small ware hole on the driver seat( i think every sc has this) i have a set of 89 rims for it and a set of 94 or 95 rims for it.o and the car is white with maron int.


parts that have less then 10 miles on them

clutch(duralast)
re-surfaced flywheel


pics are here
http://www.sccoa.com/forums/showthread.php?p=460036#post460036

hawk
10-16-2005, 01:14 PM
Hey.
How much for the sc front bumper. does it have the cornering lights or the cutouts for them. need one asap
you can email me at [email protected]
hawk

hawk
10-16-2005, 01:18 PM
where are you located?

super89
10-16-2005, 02:13 PM
where are you located?

i am in warren, michigan and ill take $125 for the front bumper it is in perfect condition no cracks nothing and its ready for paint and yes it does have the cut outs



BILL

super89
10-16-2005, 02:23 PM
make offers on other parts i know what a good front bumper is worth and some other parts but everything else im not to sure so give a part name and price

Miller1995
10-16-2005, 02:26 PM
make offers on other parts i know what a good front bumper is worth and some other parts but everything else im not to sure so give a part name and price

How much for the set of newer rims? I can come pick up.

Thanks,
Bryan Miller

Blown 91 Bird
10-16-2005, 02:33 PM
any chance on pics of the headlights in the daytime? Im in dying need of some headlights that arent yellow.

super89
10-16-2005, 03:59 PM
How much for the set of newer rims? I can come pick up.

Thanks,
Bryan Miller

$150 and the rims are yours

super89
10-16-2005, 04:01 PM
any chance on pics of the headlights in the daytime? Im in dying need of some headlights that arent yellow.

yea ill take some pics tomorrow i have 3 set so i look for the best ones

90XR7Cougar5spd
10-16-2005, 11:20 PM
I am in need of a clutch line if its in good cond. How much shipped to 74029 ifn you have one.

Derek

super89
10-17-2005, 02:36 PM
I am in need of a clutch line if its in good cond. How much shipped to 74029 ifn you have one.

Derek

i have it but i have to get the car back to my house to before i can start rippin parts off.

how about $40 shipped

90XR7Cougar5spd
10-18-2005, 09:06 PM
i have it but i have to get the car back to my house to before i can start rippin parts off.

how about $40 shipped


Sounds pretty fair too me just as long as its in good condition, mind you, im not expecting something perfect, I just dont want something that the threads have been stipped out on or the something like that. When do you expect to start ripping parts off???? Im not in any big hurry on it, just kinda curious.

Derek

BIGDOGCQ2
10-18-2005, 09:11 PM
I am interested in the blower with piping and all the front brackets and accessories I can get dirt cheap. Also need lower intake.
Let me know what you can do.
[email protected]

Randle
10-18-2005, 09:43 PM
How much do you want for the ABS unit? I only need the ABS motor, but if necessary I'll buy the whole unit.

Jamison B
10-18-2005, 10:35 PM
I am in need of a transmission, how much including shipping to Newton, KS area code 67114, am serious, b/c my syncros are shot.

super89
10-18-2005, 11:11 PM
pm's sent

and i can start pullin parts this weekend

super89
10-18-2005, 11:52 PM
I am interested in the blower with piping and all the front brackets and accessories I can get dirt cheap. Also need lower intake.
Let me know what you can do.
[email protected]


whats your zip code so i can figure shipping

slamjammer
10-26-2005, 12:31 AM
need a set of front maroon seatssend pictures to [email protected] how muct to 38456

dijubu
10-26-2005, 08:40 AM
I'm looking for some black interior moldings, just the door moldings, the door trim moldings, and the rear quarter moldings. If you're moldings are black please email me at [email protected] Thanks

95tbirdguy
10-26-2005, 11:18 AM
I need the clutch pedal assembly. how much for the assembly with shipping? i will pay any reasonable price.

90coug
10-26-2005, 12:11 PM
So you replaced the clutch? How is the slave cylinder, was it new when you installed the clutch? How much are you asking for it?


Thanks

super89
10-26-2005, 04:04 PM
sorry to everyone my comp. has been down for a few days but

slamjammer-ill look for the link because i have pics of my int. on here somewhere,and about how much would u say one seat weight i have need felt how heavy a sc seat is

dijubu-nope sorry they are maroon

95tbirdguy-what do u all want the part that comes through the fire wall and the pedal and do u want the clutch line to?and also what is ur zip code

90coug-i am not sure about the slave cylinder they guy i get the trans from said it was re built so i figured it was so im not to sure i ant gonna pull it tho i want the trans assembly to go as one



thanks,
BILL

super89
10-26-2005, 04:06 PM
need a set of front maroon seatssend pictures to [email protected] how muct to 38456


yea the pics are in this link

http://www.sccoa.com/forums/showthread.php?p=460036#post460036

91SuperCoupe
11-03-2005, 10:23 AM
how much for the engine wiring harness?


clutch(duralast)
re-surfaced flywheel


pics are here
http://www.sccoa.com/forums/showthread.php?p=460036#post460036[/QUOTE]

91SuperCoupe
11-03-2005, 11:47 AM
Hi, I was wondering how much do you want for the engine wiring harness

pics are here
http://www.sccoa.com/forums/showthread.php?p=460036#post460036[/QUOTE]

Miller1995
11-03-2005, 02:08 PM
Sorry, I haven't gotten back to you. The wheels in the pics of the car are the same I already have as in 96-97 sport wheels, not 93-95 SC wheels. You don't happen to have a set of actual 93-95 SC wheels do you?

Thanks,
-Miller

91SuperCoupe
11-03-2005, 06:07 PM
Hi I wanted to know if the engine wiring harness was any good if so I was wondering how much you would let that go for

rennerj
11-03-2005, 08:27 PM
I'm looking for some black interior moldings, just the door moldings, the door trim moldings, and the rear quarter moldings. If you're moldings are black please email me at [email protected] Thanks

Dijubu, I sent you a PM. Jim

91SuperCoupe
11-04-2005, 06:31 PM
how much do you want for the engine wiring harness email me asap at [email protected]

dougf
11-04-2005, 06:36 PM
Maybe I missed something, but why not just fix it & keep it or sell it whole?

Also, if you are selling parts, how much for the clutch pedal and all the other hardware needed for an auto to manual swap with shipping to zip code 43311?

Thanks,

Doug