PDA

View Full Version : Intake Manifold Torque Specs



Clutchin
10-21-2005, 03:58 PM
I am just curious if anyone knows the correct torque specs for the intake manifold.I have been told that many repair books are inaccurate.

joenintiesc
10-21-2005, 04:13 PM
Final torque values should be 20-22 ft. lbs. I think some manuals only say half that...

David Neibert
10-21-2005, 04:47 PM
This post contains info about intake manifold torque and the conflicting data that some manuals contain.

http://www.sccoa.com/forums/showthread.php?t=59641&page=1&pp=15&highlight=intake+manifold+torque

I do mine in three steps 7.5..15...24, then just keep repeating the torque sequence until all are at 24 ft. lbs. without turning.

David