BHJ install

68COUGAR

Registered User
Is it possible to install a new BHJ balancer (preventative maint.), with the engine still in the car? I'm thinking it should be possible, just by undressing the front of the engine. Maybe Rad. removal. I don't want to break into the A/C though.

Curious 68COUGAR
 
yes

hi, i've done 4 so far, and all were in the car, just remove the fan, i removed the radiator too, but u don't have to, don't forget the longer bolt, the stock bolt is too short, you must get a longer one from ford. good luck

Paul
 
The bolt you need is a M14x1.50(thread pitch)x55mm(bolt length). Just go to ACE Hardware and you'll find it there.

You can pull the balancer with the radiator still in, it just gives you a little more room if you take it out.
 
Back
Top