Need Help With Temp Gauge-No Reading

Top Shelf SC

Registered User
I need suggestions on getting my temp gauge to give me a reading. I justed replace my temp sensor and plugged that little wire back to it, no reading. Then Replaced the gauge in the dash and still nothing. Looks like voltage meter time, but how the heck am I gonna replace that wire all the way to the dash if that wire is bad. Is there anything else to look for?
 
The wire isn't likely to be bad all the way to the gauge. You can work with a test light and a probe to see where the break is occuring.

I've got an issue right now with the wire going to the sensor in the block, and the sensor on the thermostat housing area is not working right. The insullation on the wire is brittle so I'm going to cut it back, splice into it and then run new connections to the sensors.
 
Back
Top