ARC Help: Manual Firm Ride?

Tim Groth

SCCoA Member
Just wondering if anyone could give me some insight on how to manual turn my shocks to the firm setting. When I did my dash swap I must my missed a connection so my switch does not change the ride setting for me.

Due to this the car is always on Auto Ride and my shocks are in desperate need of replacement. Hoping that setting my shocks to firm ride will help with my overly soft ride until I get new shocks installed here in the next few weeks.

Thanks for any help.

-Tim
 
Take off the electric actuators. There should be a blade looking thing inside of the cylinder at the top of the shock. Turn it 90 degrees clockwise with some needle nose pliers. Same for all 4.
Be careful not to push it sideways. The oil will seep out of the shock if its a high milage car. Mine did and it only had 38,000 miles when I turned them myself. I don't think its detrimental though, just looking out for ya.
 
Back
Top