quick35th
Registered User
Guys I want to know what parts I need to buy to run higher RPM with my SC motor in my 35th. I know a cam, heads, blower, and bottom end all need to be be looked at to make it all work together. But I would like to know what specific cam I would need, and what rods/pistons to go with. I already know that a desent port job and valve train upgrade would be all the heads need along with a good blower.
I am asking this because I am trying to build a good autocross motor for my 35th. With the tire size that I used to run (225/50/16) I would run out of my power band in second gear pretty easily. I need to turn around 6000 RPM or at the highest 6500 RPM. Yeah the tire size is way small but Hoosier has a very limited tire size selection in for 16" wheels.
Any advice is alway appreciated guys.
Shane
I am asking this because I am trying to build a good autocross motor for my 35th. With the tire size that I used to run (225/50/16) I would run out of my power band in second gear pretty easily. I need to turn around 6000 RPM or at the highest 6500 RPM. Yeah the tire size is way small but Hoosier has a very limited tire size selection in for 16" wheels.
Any advice is alway appreciated guys.
Shane