Oil Pressure Gauge Modification

Smutty

Registered User
I search previous posts but I was unable to find instructions to convert the stock gauge to read actual oil pressure.
I may go for an aftermarket gauge.
the sending unit that I am looking at has a 1/8-27 NPT thread size.
Is this the thread that is on the stock sending unit?
Thanks.
-Smutty
 
Get the aftermarket gauge. ;) Stock is 1/4" NPT and most all aftermarket gauges include the adapter. I usually also use a brass T to retain the stock gauge and the aftermarket together. If you just unhook the stocker then your "check gauge" light will stay on.
 
Back
Top