PDA

View Full Version : Rebuilt and ported 89' supercharger

wisupercoupe
12-07-2005, 12:45 PM
Well, the super charger is up for sale again. It is totally rebuilt with a kit from Wynn and ported with the silencers welded closed. I'll take $200 shipped. Comes with the intake planum ported for a 75mm throttle body also. It will have the 10% over drive pulley on it also.
twoblownfords
12-07-2005, 01:09 PM
Do you want to sell the tb oneqkgt@aol.com
wisupercoupe
12-07-2005, 01:13 PM
Everything is gone besides the blower and inlet plenum. I'll trade for some 460 parts. Like a fox body swap oil pan, Edelbrock intake, fox swap headers. $60 items is what I'm interseted in.
ThunderRoad
12-07-2005, 03:59 PM
Well, the super charger is up for sale again. It is totally rebuilt with a kit from Wynn and ported with the silencers welded closed. I'll take $200 shipped. Comes with the intake planum ported for a 75mm throttle body also. It will have the 10% over drive pulley on it also.
IS THE PLENUM OPENED AT THE BLOWER END WITH THE BLOWER OPENING:eek:
ThunderRoad
12-07-2005, 04:00 PM
Can,t Get Pics To Get Bigger:d
wisupercoupe
12-07-2005, 05:25 PM
yes, I opened the other side of the blower also. Her'e a link to get the pic's to be larger. http://www.sccoa.com/forums/showthread.php?t=68631 The ports were welded and then liquid metal was put on top to make sure the welds were sealed. The metal was not contionously welded. Didn't want the case to warp.
wisupercoupe
12-09-2005, 12:43 PM
tHE SUPERCHARGER IS SOLD.Sold