Cooling fan fusible link

Burns Z

Registered User
I while back I fried the cooling fan motor, and also the wire bundle that holds the fusible link for the fan motor. The fusible link connects to a much thicker guage wire. Because the fusible link wire burnt so bad, I have almost nothing left I can solder the fusible link to. I can get the solder to stick to the larger wire running back down to the engine. George D had a photo of how he re-did all the wires in the bundle before, but I can not find that post. Sorry this post is so vague. If anyone has ever replaced that fusible link you may know what wires and problems I am running into.. Can anyone help me out with how I should go about getting the fusible link soldered to the other wire..

Thanks, Tom
 
I found the link/picture I was looking for.... It appears I need a bigger soldering gun to preform this work....

If anyone has anything to add please post..

Thanks Tom
 
Back
Top