Changing Steering rack bushings

Peterdroy66

Registered User
Does anybody know / remember if you can change the bushings simply by pulling the bolts out, and not nesecarily lowering the rack?

Pete
 
I believe the bushings need to be pressed out and in.

Don't you know by now - there isn't anything that's simple on an SC.

Good Luck!!

Mark
 
I was able to get the passenger side by removing the bolt and just droping the side low enough to press the bushing in. However, on the driver's side I couldn't lower the side low enough due to the power steering lines. I didn't feel like disconnecting the line, so I froze the bushing to shrink it a little and tried to press it in with the mounting bolt. It never went in all the way and I've been running like that for about 5 years.
 
Back
Top