3" Intake tube [Archive] - Super Coupe Club of America Forums

Payton

02-10-2006, 08:17 PM

JUST 5 LEFT!!!

--------------------------------------------------------------------------

I am offering 3" intake tubes. They are made of aluminum, 3 inch in diameter and 12" long. Come polished with vacuum nipple, 2 couplers and 4 clamps - pretty much everything you need to switch from your stock set up.
Price is 90 dollars shipped

First come, first serve basis!
Payton.

Looks like I will have to stop making those for a while, since we are extremelly busy ar work.

Pablo94SC

02-11-2006, 03:04 AM

You might want to move this to the new parts section...

Is the nipple on top of tube?

PS: Sorry I haven't gotten back to you. I'm still considering your other intake, but I've been a little sidetracked with my HG/upgrade project lately.

MrBlvd

02-11-2006, 01:28 PM

PM Sent .......

Payton

02-11-2006, 06:53 PM

Pablo94SC, I thing I will have more views here then on new products chapter. Thank you for your concern, though.
As for nipple it can be located at any desired place of the tube:D Just let me know when purcharse. I placed mine there because I want to run vacuum line on top of the SC snout. That's just me. 3' intake is still for grabs but as I said before it doesn't come with couplers. I can give you my clamps thought:p

MrBlvd, you have one in return.;)

Payton

02-12-2006, 01:29 PM

Price didn't include shipping charges, so it is up to 90 USD to anywhere in North America.:eek: ;)

Payton

02-12-2006, 05:06 PM

hint: two units were sold, so only 3 are left:rolleyes:

Pablo94SC

02-13-2006, 12:07 PM

The reason I mentioned moving it to the new parts is because you could be a serious competitor to MP and stand to make a killing. That's just the salesman in me talking though. :D

Payton

02-17-2006, 11:52 PM

Just two more intakes left:rolleyes: .

Payton

02-28-2006, 01:04 AM

Just two more intakes left:rolleyes: .
Nobody wants one?:rolleyes:

S_Mazza

02-28-2006, 02:09 PM

I am interested. Does this go all the way from the stock TB to the stock MAF?

Payton

02-28-2006, 07:52 PM

I am interested. Does this go all the way from the stock TB to the stock MAF?
That's correct. I can make it longer than 12" for you though

bigg_boyys_SC

03-01-2006, 12:46 PM

Here is what my box looks like, I will be rebuilding out of stainless steel in the near future. The size will be the same.

S_Mazza

03-01-2006, 06:16 PM

So I can get a 3" non-polished tube with the vacuum nipple in the stock location (I want to keep the PCV) for $80 (less couplers)?

Dahoopd

03-01-2006, 06:26 PM

deleted...............

Payton

03-01-2006, 08:35 PM

Biggin, nice welding job there;) :p I think we have a deal. It looks easier than you described/or than I though))) I sent you a PM;)
Payton

Payton

03-01-2006, 08:40 PM

So I can get a 3" non-polished tube with the vacuum nipple in the stock location (I want to keep the PCV) for $80 (less couplers)?
Steve, are you looking to get a 3" intake or 3.5" intake? Just to make things clear;)
You are correct, if you don't want me to polish it, it will cost you 80 bucks shipped.
Payton

S_Mazza

03-02-2006, 12:02 PM

3" (the small one). I'll take the non-polished for $80. (I will probably paint it or just spray some clear coat on it.) PM me with payment instructions.

Payton

03-03-2006, 12:30 AM

PM send to everyone contacted me;)

Payton

03-09-2006, 01:00 AM

I have one intake 3.5" in diametor and 12" long, that can ONLY be with cone air filter...Polished, 2 couplers, 4 clamps, PVC nipple.
Anyone????

Payton

03-15-2006, 02:47 PM

I have few more now...Don't really want to put them on ebay. I'd rather have you to keep some coin in your pocket then in ebay's:rolleyes:

Payton

03-28-2006, 09:15 PM

Any more takers???

seawalkersee

03-28-2006, 09:29 PM

I will let you know in a few days.

Chris

Payton

03-28-2006, 11:39 PM

I will let you know in a few days.

Chris
Sounds good, Chris!

terpsfan88

03-29-2006, 04:30 PM

I have a 93 super coupe with 5 speed manual trannyy. i was wondering if you had that. get back to me

Payton

03-29-2006, 05:30 PM

I have a 93 super coupe with 5 speed manual trannyy. i was wondering if you had that. get back to me
Not sure I understand what are you looking for here...

Payton

04-08-2006, 07:43 PM

I listed one on evilBay!

seawalkersee

04-08-2006, 08:13 PM

The 85mm T-bodies are on back order. When I get mine, I will let you know. I expected it earlier but it should be by the end of next week.

Chris

Payton

05-03-2006, 12:24 AM

Looks like I will have to stop making them for a while, since we are extremelly busy at work and there is only one bender for the whole company.
I still have two intakes ready to ship. They come as a kit: polished, 2 blue couplers and 4 clamps. 90 bucks shipped.
Chris, I am not putting a pressure on you, but I know you wanted one, buddy, therefore you have first dips.
Dahoop, what about you, are you getting one?

Dahoopd

05-03-2006, 07:53 AM

Payton

05-11-2006, 10:38 PM

PM sent........
You got few back))) Nice avatar!

Payton

05-19-2006, 11:53 PM

Anybody else?

MrBlvd

05-20-2006, 11:56 AM

I have Payton's 3.5" tube and it is a niece piece of work:)

boost boi

06-03-2006, 03:52 AM

Here is what my box looks like, I will be rebuilding out of stainless steel in the near future. The size will be the same.

I bought mine with the cold air intake like the one of you guys make and sell I was interested in purchasing one of those dividers off you's so holla atcha boi

also my cold air intake does'nt have a nipple thing after the mafs sensor so its got a leak and I can't think of anything to connect it its just a open hole like pinkysize .

help is always apreciated!

seawalkersee

06-03-2006, 10:01 AM

That hole is for your PCV hose that runs from the valve cover into the intake. There is your Holla....

Chris

lube70

06-03-2006, 10:46 PM

I have the MAC intake and wondered if this piece will fit between the throttle body and the stock MAC 90* tube????

I need a larger air tube so the 3 1/2 you are offering would be great!!!

Any info, please post.

Don

Payton

06-04-2006, 01:47 AM

Don, if your "stock" MAC 90* tube is located in the exact place where MAF used to be, then we don't have any fitting issues))) I think that MAC intake came with 3.5" 90*bent tube and smaller intake tube that goes to the TB...correct me if I am wrong.lol.