PDA

View Full Version : Oil Filter Relocation Kit



ss_scuba
02-11-2006, 04:19 AM
Okay, sorry for the wait. The kits are now available.

Here are the details:
-Made of 6061 T6 Billet Aluminum
-Fittings are all brass 3/8" NPT
-Hose is rated for 250psi @ 240*F
-Provision for an external oil pressure gauge on the block adapter (1/8" NPT with a plug if you don't use it)
-Price is $100 canadian plus shipping. I will ship to anywhere in N America.

I need a group buy of 10 to get this price. I will be the first in line for this, and I am not gaining anything out of this.

You can put the oil filter almost anywhere you want, and it will make oil changes easier as you won't spill oil onto the stock k-member anymore.

Pics are as follows (sorry about the blurry, my camera wouldn't focus):

ipeefreely
02-11-2006, 06:52 PM
I'm interested.

What type of payment will you be accepting?

ss_scuba
02-11-2006, 07:37 PM
I haven't used paypal since I got burnt by them...and thus I had shut my account down. Money orders, cheques, etc only for now.

midnitethunder
02-12-2006, 03:03 PM
yes i want 1 to tell me how to get it sooner with out the group buy i dont care the price

txsc
02-24-2006, 12:22 AM
What's the cost in USD? Shipping to 78154?

Thanks,

JD

Grims95SC
02-24-2006, 03:07 AM
It would be roughly $83-88 depending on the exchange rate.

tim
02-26-2006, 01:25 AM
Put me down for one please!! Let me know how much us dollars.:D

Grims95SC
02-26-2006, 06:34 AM
Look one post up. :rolleyes:

ss_scuba
02-26-2006, 02:34 PM
Unfortunately I did not receive the support for this when it was needed, and thus the group buy did not happen. However, Travis (the guy who had these made up) is completely willing to deal with anyone who is interested. You can contact him at cp1_123@hotmail.com. Tell him that Scott sent you.

pablon2
02-26-2006, 04:36 PM
Unfortunately I did not receive the support for this when it was needed, and thus the group buy did not happen. However, Travis (the guy who had these made up) is completely willing to deal with anyone who is interested. You can contact him at cp1_123@hotmail.com. Tell him that Scott sent you.


Just wanted to let everyone know, I recently worked with Travis on a set-up for my car and he was great to work with. Great communication and super quick shipping (from Canada even).

pablon2
04-14-2008, 08:52 AM
Resurrecting this thread as I believe others might have this question as well. With this product (see pics in first post), which of the ports are the inlet and outlet? The hole coming out of the raised (top) portion of the fitting mates to the center hole of the oil filter. Does this make it an outlet port? I guess I am unlcear as to how the oil filter processes the oil. :(

Mike8675309
04-14-2008, 10:20 PM
I know you won't like this answer, but I guess I would drop some oil in one section or the other, and find out what hole it comes out.

Note oil flows in the outer ring of the oil filter, is cleaned, and then exits through the center. From the picture it appears the top barb (closed to the shiny side) is the outlet, and the lower barb (close to where the filter goes) is the inlet side.

pablon2
04-15-2008, 10:15 AM
That helps. I am thinking of reinstalling the relocation filter/cooler and want to make it painstakingly sure I have it 'wired' correctly. I also sent ss_scuba a PM and will update as warranted.