fast Ed said:Hey Mike
16" wheels will clear the rear Cobra brakes. So if you still have MN-12 bolt pattern, you can run stock MN-12 16" wheels. If you've swapped to Mustang bolt pattern when you did the brake upgrade, then you can use any of the SN-95 Mustang (94 - 04) factory 16" wheels. They are 7.5" wide, half an inch wider than the MN-12 wheels.
Of course wider aftermarket wheels are an option too. The 10.5" or 255 mm width DOT drag tires would work even better on wheels that are 8 to 9" wide.
cheers
Ed N.
XR7 Dave said:They used to offer a 16x8 Cobra R but I don't think you can get it anymore.
Good luck in that Mike, I've been looking for quite some time for a wheel that would fit. Custom is about the only way to go.
Summit racing has them on their clearance section. http://store.summitracing.com/partd...rt=PWO-28668452&N=210+4294923107&autoview=skuXR7 Dave said:They used to offer a 16x8 Cobra R but I don't think you can get it anymore.
Good luck in that Mike, I've been looking for quite some time for a wheel that would fit. Custom is about the only way to go.