Jim Demmitt Jr
Banned
"Looking to for this setup"
AC Delete pulley setup for a SC who makes them? link price thanks for your time and info
AC Delete pulley setup for a SC who makes them? link price thanks for your time and info
Burbank95sc said:Save yourself some money on buying a\c delete kit and do what I did.Look at the link post #10
http://www.sccoa.com/forums/showthread.php?t=74037
Sampo said:Contact Ryan Harris! ( supercoupeinnovations@sympatico.ca )
Maybe he has some left... Price is about $50 or something...I mean pulley is $50 and you'll also need the bracket!
Randy N Connie said:Jim
I just run a shorter belt. It save HP over using the replacment idler pulley
in place of the A/C compessor pulley.
You just need a shorter belt.
I run my shorter belt over the alternator tention idler pulley.
I have a small slot in the alternater bracket,I can just loosen
the top alternater bolt,and push on the side of the alternater
to pivot it so it will tighten the belt.
Mine adjusts just like the older fords would. I have not modified
my alternater tention pulley like others.
I have had no problems for 3 + years.
I beleive by deleting the A/C pulley, to be worth 5 + HP.
I would never replace the A/C compessor pulley with another pulley.
That makes no sence at all,performace wise or money wise. Just
buy a shorter belt.
With all that crap removed you can cut down the A/C bracket and save even more weight.
In the picture you can see the belt over the alternater pulley.This is to give more wrap around the waterpump pulley. And you can also see in the picture, how the A/C bracket has been cleaned up. Buy machining the A/C mounting boss's off the bracket.Look jim you can even see the spark plug boots on the spark plugs. This in its self is worth not going with another pulley for the A/C.
Save yourself some Money, HP, And make life a little easier when changing spark plugs.Buy a shorter belt!
Randy
Randy N Connie said:Jim
I beleive by deleting the A/C pulley, to be worth 5 + HP.
Randy
Sampo said:How sure are you of that!? It's hard to believe deleting A/C pulley you will gain
5 + HP...
I think your estimate is real optimistic. The true has to be around 0-1 hp gain. When you have dyno papers about it then I can believe, not before...
Randy N Connie said:I don't care if you beleive my guess-sta-ment on not.
No I do not have a dyno sheet just to show a A/C delete.
I base my guess-sta-ment on some numbers put out about Ryan H.
jackshaft pulley.By going from a steel jackshaft to a alumimun jackshaft
pulley.People were showing on there dyno sheets 12 to 15 RWHP gain.
We have an old saying in the USA.
You can lead a jackass to the water hole ,but you can't make him drink.
I am making over 280 RWHP & over 400 RWTQ with a stock motor.
Sampo ,What are you running as far as RWHP.
Thanks Randy
Randy N Connie said:Listen ~~~~~~~ you started the crap with me not the other way around.
You started by calling me a lier.
I was tring to be helpful to jim and I am also to other.I am always nice to others,unless they want to start crap with me, like you are doing..
If you don't like the way I try to help others.next time you see a post from me pass it by.Don't lay your lame ~~~~~~~~ on me.
RANDY
Darn, the only finnish to english translator I could find was blocked at workSampo said:PS. Se elukka älähtää johon kalikka kalahtaa! ( An old Finnish saying )
Sampo said:True every word!
BTW, I bet you can't translate my Finnish traditional saying! But hey, try and tell me the result...
Seuss said:It beast howl where stick clash
Somehow I don't think that translator worked very well