had the engine rebuilt now the cruise wont work

MySCRocket1203

Registered User
hey guys just had the engine rebuilt and now the cruise control wont engage. any idea what could have caused this. is this a common problem? what would be the common cause of the cruise not working? btw the engine is runnign strong and no vac leaks. cant wait to hit 500 miles then oil change and then LACR
 
Also, the vacuum dump that is activated when you push the brake pedal could be mis-adjusted. (Although I don't know how that would have gotten screwed up during the rebuild.) If you get up to speed and activate the cruise control, can you hear a faint hiss? If so, then your electronics are probably working. Then check under the dash - the vacuum dump is a little black valve with yellow tip that threads into a bracket just above the brake pedal. In the resting position, the brake pedal arm should push the yellow tip in far enough to block the release of vacuum. To adjust, you just remove the hose and turn the valve.
 
Back
Top