Speedometer 1989 SC, 5 speed

ErnieT

Registered User
Local Mech says Paper Face is coming loose on Speedometer is hanging the needle. Can anyone tell me where I can get a new Face. nothing wrong with the Odometer.
 
stock face not paper.

I never ever heard of the plastic face seperating from those guages....if odo works, then you might as well look on ebay for another...I had one with good odo, bad speedo, replaced guage, fixed....
good luck!
 
Are they the original faces, or white faced ones?

The Knucklehead PO put white face gauged on mine, and the glue wasn't holding anymore, had the same problem, plus he didn't put the needle back on the fuel gauge properly, so the 1st week I had it I ran out of gas at 1/4 tank.

Take it all apart, use some clear Epoxy (bought at Advance Auto) to hold the faces on. I tried Super Glue type stuff, it let loose again in a couple of weeks.

Good luck.
 
Back
Top