Audio help...

rhodes588

Registered User
So I just fried my Audiobahn amp... and it was awesome. Do you think I messed up the subs at all? The type r's were running on 1 ohm and the amp wasn't stable at 1 ohm.

And could someone help me look for a amp that wouldn't fry with 2 10" type r duals voice coil (2 OHM)
 
check the woofers b4 hooking to anything else...

rhodes588 said:
So I just fried my Audiobahn amp... and it was awesome. Do you think I messed up the subs at all? The type r's were running on 1 ohm and the amp wasn't stable at 1 ohm.

And could someone help me look for a amp that wouldn't fry with 2 10" type r duals voice coil (2 OHM)

Any 2 ohm stable amp with an RMS power OUTPUT rating =to or greater than the maximum continuous INPUT power rating of your speakers will give you the most desirable results. Do NOT load any amplifier below its rated minimum Impedance, unless you like buying new amps every two days...

I would put an ohm meter on each of those four voice coils for sudden drops in impedance throughout the QM factor (actual mechanical movement range) ...

paul
 
Back
Top