Help w/ balancer/Bolt/Washer combo

jettburn

Registered User
I Have installed a new OEM HB on my 91 Auto. I also have the Mustang 3.8 bolt. I looked at the bolt in the crank and I'm not really sure it does anything at all without the washer. I'm not even sure the HB is all the way on. I got a few problems left to settle.

Now,

Do I need a WASHER for the Mustang crank bolt? If so, what diameter is the original washer? Does for Ford still sell them?

Thnx, AAAHA (Any and all help appreciated)
 
You're correct

You definately need either the stock washer or the Mustang washer, the bolt does nothing without the washer. John
 
you need to get the mustang washer too. I used the mustang bolt and washer when I repalced mine, they are different than the OE SC one's. Without the washer nothing is holding the balancer on. Make sure you torque the bolt and washer to 100ft.lb.
 
Back
Top