PDA

View Full Version : more ABS swap questions



qbg6
03-14-2006, 12:40 AM
Like most of you i am in the process of doing the abs swap. I've read most of the posts and i still have a few questions. First, i might have missed this in reading... Can i use the non abs system from a doner car if i run a forth line?:confused: If so will i need to use a prerportioning valve on the rear? :confused: I will need to drill a new hole for the three bolt master cylinder correct? :confused: Thank you guys for the help so far.

Jonathan

Jeremy_K
03-14-2006, 07:02 PM
Don't make it any harder than it needs to be. You don't need to run a fourth line. I don't know as if anyone here has even done that to guide you. Many guys have done the swap mentioned in the main ABS to conventional swap thread. I can help you out if that's the way you want to go. I can tell you what parts you need and answer any questions you may have.

-Jeremy