I recently started to have some problems with my 92 SC. It seems that when I try to downshift from 3rd to 2nd, instead of having a smooth slide into it I end up with resistance. As I push the shifter into 2nd, there is grinding and I can't shift down until my rpms are pretty low. When I shift from 1st into 2nd I don't have any problems, or with any other gear. I only have the problem going from 3rd to 2nd.
I recently replaced the stock clutch with a SPEC clutch set, so I don't think the clutch is the problem. Any ideas as to what the problem could be?
I recently replaced the stock clutch with a SPEC clutch set, so I don't think the clutch is the problem. Any ideas as to what the problem could be?