Replacing Door Hinge...

darkstar_one

Registered User
Hey i am in the process of trying to replace my upper driver side door hinge to cure the horrible sag it has... now the problem is... that one bolt that seems mysteriously somehow bolted to the frame... how do i go about accessing that bolt and is it required... thanks...
 
If the sag/play isn't too bad and you've checked to see if any of the pin bushing remains (and actual hinge pin hole isn't ovalized) then it would be cheaper & easier to instal MN12's replacement pin kit. And you can do it with only removing the door half of the hinge.
 
You have to reach way up inside there from behind your kick panel to get at the nut holding the hinge on.
 
Back
Top