95 trunk lock

thundrburd

Registered User
does anyone know how hard it is to replace the trunk lock on a 95 sc, I bought the car about a month ago but noticed there was no key for the trunk and would like to replace it and the lock in the center console but dont know how hard it would be to replace, and if so is anyone parting out a car that would have them with a key ?
 
This should be a relativly easy project. The lock/button in the center console pops out of the glove box. To remove the trunk cylinder, take off the cover and look at the lock from behind. There should be a rod going down to the lock assembly. Remove it and the nut holding the cylinder in and it should slide out. When you reinstall, make sure your seal behind the cylinder is good so no water gets in.

There are so many SC's being parted out that someone must have a set with a key.

Good luck.

Mark
'95 5spd
 
Back
Top