Billabong089
Registered User
Hey,
I took the lower intake and everything on top of that off. I replaced the gaskets, etc and also the FPR. I currently have the brake master cylinder out, waiting for an abs pressure switch.
But since I had it all apart and what not, I wanted to see If I could get it to start up so I hooked everything up, and it cranks but it wont start.
I don't think the fuel pump is priming, and this is strange AS HELL, I turn the key to run, I hear a click from the back of the car, I turn the key to off and I hear something prime, I dont know what it could be.
But either way, the car wont start and i'm puzzeled, I put a fuel pressure guage on the rail and it does have pressure for a short time.
Perhaps I have something disconnected that shouldnt be, It should run without the ABS/brake wires hooked up correct? Also I noticed when the car is in the RUN position, I dont see the check engine light on, just check guages and the ABS light.
PLEEEEEEEEEEEEEEASE some ideas
I took the lower intake and everything on top of that off. I replaced the gaskets, etc and also the FPR. I currently have the brake master cylinder out, waiting for an abs pressure switch.
But since I had it all apart and what not, I wanted to see If I could get it to start up so I hooked everything up, and it cranks but it wont start.
I don't think the fuel pump is priming, and this is strange AS HELL, I turn the key to run, I hear a click from the back of the car, I turn the key to off and I hear something prime, I dont know what it could be.
But either way, the car wont start and i'm puzzeled, I put a fuel pressure guage on the rail and it does have pressure for a short time.
Perhaps I have something disconnected that shouldnt be, It should run without the ABS/brake wires hooked up correct? Also I noticed when the car is in the RUN position, I dont see the check engine light on, just check guages and the ABS light.
PLEEEEEEEEEEEEEEASE some ideas