PDA

View Full Version : Need pic of the ps pump fitting orientation..



sizemoremk
05-08-2006, 11:09 PM
Hey guys, got my car 90% or so reassembled, about to fire it up... FINALLY!!!

I need a pic if someone has one or could snap a quick one for a brutha;)

I am hooking up the PS pump, and don't remmeber the orientation of the PS pump line into the back of the pump...

Can someone post a pic please:o

I have quite a few pics, but I somehow missed that angle:(

Thanks guys!

thirdbird
05-08-2006, 11:39 PM
That high pressure line SHOULD flex once its tightened onto the pump(mine did). I just bolted the bracket back to the motor with the ps pump on it loose, checked for conflicts, and snugged it all down when there were none.
I thought it would be a pain, but it turned out to work itself out.
If the hp line is not supposed to flex when they are tight, than UH OH.
But so far so good for me.....No leaks yet.....:)

paul

J.D.
05-09-2006, 12:32 AM
The PS reservoir neck has been taken off in the pictures.

sizemoremk
05-09-2006, 12:50 AM
Thanks a million!