Where's this hose, any pics???

Merlon

Registered User
"actually, you should suck it in from the little air tube that leads to the boost gauge... the one on the plenum to the manifold. behind the Air Charge Temperature Sensor. Disconnect the hose and get a same diameter hose have it suck up the sea foam from there."

in regards to using seafoam in our cars.

because i was going to get a shoallow cup and add it through the pcv valve slowly, but the guys in my seafoam for our cars post seem to think this ways better.
 
Don't have a pic for you but I know exactly where the location of it is. Top right hand side of the motor on the grey tubular arm going into the intake manifold you will find a small rubber hose coming out into a plastic vacuum hose running back to the boost gauge. Hope that helps
 
Back
Top