"actually, you should suck it in from the little air tube that leads to the boost gauge... the one on the plenum to the manifold. behind the Air Charge Temperature Sensor. Disconnect the hose and get a same diameter hose have it suck up the sea foam from there."
in regards to using seafoam in our cars.
because i was going to get a shoallow cup and add it through the pcv valve slowly, but the guys in my seafoam for our cars post seem to think this ways better.
in regards to using seafoam in our cars.
because i was going to get a shoallow cup and add it through the pcv valve slowly, but the guys in my seafoam for our cars post seem to think this ways better.