What does everyone think of...

Ebay intercoolers are good. Nice thick aluminum with some good TIG welds on them.

If I can get away with a 31x12x4 then you can get away with alot of intercoolers on EBay. Look at how you want to route your piping and get an intercooler based off of that.
 
check out some of my posts about a custom FMIC

same side inlet/outlet saves you some tubing and is easier to make.
 
thats the same style I just purchased. Figured the less pipe in the engine bay less heat in the intercooler. The one i puchased is the exact same one from Procharger except the outlets are on the same side
 
Back
Top