PDA

View Full Version : Passive Restraint Limit Switches



littleboylan
06-26-2006, 03:00 PM
Well I have been trying to diagnose why my seatbelt wont move away from the closed position, and Im thinking im going to give the Limit Switches a shot.

Only problem being is that the Ford Dealership says there obsolete, so does ANYONE know were I might be able to find these switches at?

Thanks Mike

the-big-e
06-26-2006, 03:06 PM
I have a pair here on my 89 XR-7 parts car.....

littleboylan
06-26-2006, 06:51 PM
PM Sent

Thanks

littleboylan
06-26-2006, 10:04 PM
After Days of trying to figure this out, I decided to take it ALL apart.

Well it looks like that in the motor part of the track, the track bound up and locked up the gear of the motor, which resulted in a deformed and ruined Drive gear.

Off to the Junkyards to find a good drive.

Figure I would post another reason of why the Passive restraint wont move to the A pillar.

sts70004
09-29-2009, 03:04 AM
My driver's side doesn't work and I tried the whole turn the knob on the motor thing, and the motor did spin when I opened the door, but only a tiny bit and it hits a lot of resistance all of the sudden. Also when turning that knob, the seat belt did not move. Is the problem on yours likely the cause of mine? I don't know how to remove the rear seats to look.