PDA

View Full Version : What does the stock MAF bolt to?



NickM
07-02-2006, 03:51 PM
On my '89, the previous owner had put a K&N on the end of the MAF. This assembly was laying down on the fenderwell, where one of the studs from the airbox underneath had put a hole in the filter. On the underside of the MAF, I see three threaded holes, presumably for some kind of support bracket. Anyone clue me in on haw to support this assembly until I have a chance put in a CAI?

Nick

ThunderDave
07-02-2006, 04:26 PM
In stock form, the maf was connected to the filter box. I can't remember if the bottom of the maf was bolted to anything as I haven't had a filter box in a while.

birds4us
07-02-2006, 04:29 PM
Only bolted to the filter box.

NickM
07-02-2006, 07:41 PM
Okay-thanks guys.
Guess I'll have to fab something up.

Nick