I have installed an new accumulator and o-rings and I am still having problems. I did not change the orfice, condensor, compresor at this point. I need help finding the problem. This is what I have done so far.
I have installed new accumulator and orings. I recharged with new oil (3 oz) and I then charged with 19 oz of 134a. The Compressor cycles about every 90 seconds after this is complete. I dont see any leaks but have not added the die to check for leaks at this point. During the cycle it pressure is at 51-52 then cycles. After it cycle is goes back to 25-26 and then starts the process all over again. Do I need more R134a, compresor, or orfice line. Any Help would be great. Thanks
I have installed new accumulator and orings. I recharged with new oil (3 oz) and I then charged with 19 oz of 134a. The Compressor cycles about every 90 seconds after this is complete. I dont see any leaks but have not added the die to check for leaks at this point. During the cycle it pressure is at 51-52 then cycles. After it cycle is goes back to 25-26 and then starts the process all over again. Do I need more R134a, compresor, or orfice line. Any Help would be great. Thanks