PDA

View Full Version : screw under SC tube elbow



ben04
07-05-2006, 06:16 PM
this is regarding the screw underneath the "SUPERCHARGED" elbow:

is it necessary to have there at all? just wondering...:D

V6Sprout
07-05-2006, 06:41 PM
it helps support the IC tubing cause its so heavy adn teh IC just hangs off the IC tubes, mine doesn't quite line up so I left mine out, the lower IC tube has 2 spots its held to the block so you will be fine without it.

drummerzrok24
07-05-2006, 07:31 PM
I didnt use mine after I put a raised top on.

BT Motorsports
07-05-2006, 07:31 PM
Though not absolutely needed, it is a good idea to leave it on as it helps support the IC. I leave the stud in place and slot the hole so the tube can be taken off without any hassle.

Paul

Jeremy_K
07-06-2006, 01:30 PM
I ran without it for a long time. Then one day I just stumbled across a nice shiny bolt in my garage that went in there perfect.:D

pablon2
07-06-2006, 02:14 PM
I have a XXIC w/o the bolt. I prefer to have the bolt in there for support though. Might slot the hole so I can line up the raised top and IC tubing. I couldn't get it to line-up without removing the bolt.