need pumpkin with 4;10 gears

I would like to buy a pumkin with 4:10 gears. A iron housing or would like
to buy a Mach VIII Aluminum housing.
Thanks Randy

With trac-loc

Thanks Randy

What are you up to?

Sounds like he may be looking at those 4.10's in Charles car....

I can do that what are you looking to spend I can give you the options or are you wanting used?
Alan

I want the 4:10 gear to use at the shootout,only. So I plan
to use them for one day. Plus the drive to and back home
from the shootout. So I want to spend as least amont as
possible.

I was hoping with the 4:10 gear (Iron housing) & with the
right height tire. This would get me closer to a 12.999 ET pass.
And set a new record for a stock long block at the shootout.

Then after race I would like to go with the 3:73 gear,in a
Mach VIII aluminum housing. Right now I have the stock gear
ratio.

Alan:
So I need a cheap or used 4:10 .
and a new built (in the Mach VIII Housing) 3:73 geared rear ends.

My SCBird set up is, a AOD Lentech, non-lock, 2500 stall. I hope
to be turning 300 to 320 RWHP. With my parts I have power up to
5200 rpms.

Randy

I happen to know a guy with a used 4.10 but I think the clutches are slipping a little. The 3.73 I can easily do if you pm me we'll figure out exactly what parts you want and I can give you a quote. A used 3.73 would be alot easier for me to some up with I am highly considering going 4.30 on my bird.
Alan