Help Stereo Problems !

The amps for the speakers on the stock system where powered through the speakers wires from the stereo.

When you install a new stereo, you need to either buy an adapter that bypasses the amps in the back, or run new speaker wire to the speakers directly from the stereo. Most stereo's these days put out more power than the amps do anways.

Frit
 
Id suggest running all new wires to the speakers, and possibly adding your own amp. Its fairly easy to do. The only factory wiring you have to touch is the power, ground, and ignition wires that went to the factory unit.

-Nick

Heres some pics of my setup...

100_0799.jpg


100_0802.jpg


The amp wiring could be neater... I havent had the free time to straighten it out. Good luck w/ your setup.
 
Back
Top