TPS Wire Colours

Dirk SC

Registered User
I am trying to tune my Pro Products throttle body but every instruction set I look at for adjusting the TPS mentions different colour wires then i have. My wires off the TPS go "Grey w/pink, Grey w/white, and Brown (black maybe) w/white" in that order. All the instuctions mention Green wires to test. So my question is....wich wires am I supposed to be testing?
 
Kevin Varnes said:
I'm pretty sure you want the grey/white and grey/red(or pink) wires.


Correct, I just had the same question so I looked in the Ford Service Manual on CD and it is gray/white going into Pin #47 for the EEC anyhow.
 
pablon2 said:
Correct, I just had the same question so I looked in the Ford Service Manual on CD and it is gray/white going into Pin #47 for the EEC anyhow.

Ok so probe the grey w/white with the red lead on my volt meter and ground the black?
 
Back
Top