shadow357x2
Registered User
Ok, here we go again, Ive been having intermittant cel going on here and finally got around to scanning it.
Pulled code 11 on koeo test (all ok)
pulled codes 42,92 on the koer test, which in turn comes back as both left and right o2 sensors rnning rich.
Already change the o2's out and reset the kam. After a rescan I still have the same codes appearing.
Question is , 2 known good o2's installed (even pulled tem back out and ohmed them out. Could this be a ground problem or should I look elsewhere?
S
Pulled code 11 on koeo test (all ok)
pulled codes 42,92 on the koer test, which in turn comes back as both left and right o2 sensors rnning rich.
Already change the o2's out and reset the kam. After a rescan I still have the same codes appearing.
Question is , 2 known good o2's installed (even pulled tem back out and ohmed them out. Could this be a ground problem or should I look elsewhere?
S