SuperCoupe007
Registered User
I know this is not SC related, but I was hoping someone could help me out on this. OK. Its an 01' E-250 w/ a 4.2L V-6 I ran the OBD II scanner and got a "P0302" 'Cylinder 2 Misfire'. I changed the spark plugs (gapped them to .054") and new wires, and cleared the codes. After 30 miles or so, the CEL came back on. Ran codes and got the same code 'P0302' ?????? Anybody have any experience with these ???? I dunno if this is a common problem on these. I checked the wires, and none of them are touching anything. I need to pass smog inorder to get the tags..
Need your help guys...
Thanks....
Need your help guys...
Thanks....