Manual Heater Temp Cable

rmsuper

Registered User
Can someone tell me what the proper routing for the cable from the temp control to the blend door is.
Thanx
 
Are you talking about the hot/cold lever cable?? If memory serves me correctly…(sitting in the car) the cable exits the temp. control unit out through the left, up to the right side of the instrument panel. Then under (or behind) the radio over to the left side of the car just under the windshield defrost vents then down to the ‘blend door’ (start to finish it almost make a complete circle routing through the dash to the fire wall and back) p.s. don’t screw with the control side of the cable too much (like me) it is just pressed on and if it pops off your off to the wreakers for another one.
hope this helps
 
Back
Top