TexasThunderbirds - moving - SC yard sale - *pics*

[tbird88]

Moving outa Koko's, piled up lots of spare parts there and at home from 12-13 Super Coupes. Some of 'em are those lil trinkets that ain't no fun to remove from the car, some are more common. No extra charge for dust/leaves/critters, I'll do what I can to remove anything deadly :p

I have tons more pics to take, been collecting since early 2001 and have way too many parts on hand, will add pics as time allows. Also have a couple of running 90/91 SC's that I would sell reasonably enuff to make it worth someone's time to come get one (or two).

If you've dealt with me in the past then ya know shipping will be as cheap as possible, not here to make money off of that.

Postal Money orders preferred but PayPal is also okay, no extra charge for PayPal. I ship worldwide through USPS, DHL, FedEx, whatever you want.

YES, still fabricating etc and will get back up to speed as soon as I adjust to my new job, just tryin' to find this stuff a good home before it sits around any longer and gets ruined...thanks for lookin',

'bird

NO warranties expressed/implied blah blah etc etc

PIC 1:
Intake hose 10
battery tray 15
gas pedal assy 5
oil cooler hose 5
dash tray liner thingy 5
dead pedal 5
BLUE seatbelt retractors, inertia works fine on both, pair-10
3rd brakelight, light sockets perfect 10
Clutch reservoir 10
Hood cable 15
http://www.datarecall.net/~tbird88/temp/4sale/yardsale/yardsale_10518.jpg

PIC 2:
Intake hose 89/90 complete 25
IC baffle 20
Drvrside switch assy 10
P/S bracket 10
Overflow tank 5
Pass switch w/lock solenoid (gob in middle of table) 10
Cam position assy 10
Oil cooler hose 5
Rear bumper support 10
PCV lines 10 each
http://www.datarecall.net/~tbird88/temp/4sale/yardsale/yardsale_20528.jpg

PIC 3:
Fuel rail (incl FPR w/hose) missing 1 injector 25
Master cyl, use as core?, tank ruined 20
Fuse box 5
ARC w/cover 5
5-spd plate 20
Headlight switch w/connector 5
Gas pedal 5
Brake pedal (5-spd?) 20 each
http://www.datarecall.net/~tbird88/temp/4sale/yardsale/yardsale_30538.jpg

PIC 4:
Fuel rail w/FPR, part of one inj missing 25
http://www.datarecall.net/~tbird88/temp/4sale/yardsale/yardsale_40548.jpg

PIC 5:
ACR w/cvr 5
5spd clutch brkt support (kinda mangy) 5
Water pump pulley 5
Trans mount 5
Fuel line cvr 5
Switches 2
Boost thingy 5
Crank sensor w/brkt & wires 5
Console wiring 3
Inst cluster connector 2 bucks each
CD connectors 2 each
Hoodlamp wiring 5
Early oil dipstick 10
PCV crossover tube (rough but no holes) 5
Cruise hose w/switch 5
http://www.datarecall.net/~tbird88/temp/4sale/yardsale/yardsale_50558.jpg

[rickbtbird]

Hey, I don't seen anything posted I need but I sure could use a reworked ported set of exhaust manifolds for a 95. You did such a good job on the ones for my 90 you have a return customer. I might have a set of cores lined up in the next few days.

[tbird88]

Hey, I don't seen anything posted I need but I sure could use a reworked ported set of exhaust manifolds for a 95. You did such a good job on the ones for my 90 you have a return customer. I might have a set of cores lined up in the next few days.

I think there's about 6-7 sets of manifolds around here but none that are already ported, hope to port as many in advance as possible as soon as I can get settled into the new job. My work hours are different now, 7am-3:30pm and I can get a few things done in the afternoon before everyone closes at 5pm but girlfriend has volunteered to help pick up parts around town and ship when need be.
Gonna be a lil confusing over the next few weeks but it'll settle into some sort of pattern, then I can rock-n-roll. I'll keep addin' pics as I can sort out whatever seems like sumthin' anyone can use, some of it probably hasn't crossed anyone's mind but when they see the pic they'll think "hey, I been needin' one of those" or "don't see one of those off the car very often" and they'll buy it. Sound like a plan?

As far as 94/95 cores, not sure I have any in the pile. Saw some in somebody's ad here on the board for 94/95 stuff, they wanted 50 shipped I think.

thanks for the compliment!

'bird

[rickbtbird]

I'm getting a set of 94/95 cores today so they should be on there way to your place. I'll setup a paypal for the porting and coating too. Is the address on your site still valid or do you have a new one?

[tbird88]

I'm getting a set of 94/95 cores today so they should be on there way to your place. I'll setup a paypal for the porting and coating too. Is the address on your site still valid or do you have a new one?
PM sent :)

'bird

[youngfordfan61]

Got an ircm for a 93' 5 speed??
Maybe a factory cd player?
Thanks have a good day
mcw

[CMac89]

Do you have any DIS modules?

I need two definite good ones.

[tbird88]

Got an ircm for a 93' 5 speed??
Maybe a factory cd player?
Thanks have a good day
mcw
I guarantee there's a few IRCM's out there but they're 89-91, does anyone know what years will swap? I's figure 89 to 93 would all be the same but then again we ARE talkin' Super Coupes... :p

If they'll swap, IRCM will run ya $20

'bird

[tbird88]

Do you have any DIS modules?

I need two definite good ones.
Might be a tuffy to find where those are hidden, I'll try to check out in the garage.

'bird

[Rodeo Joe]

Wynn,

I'd be interested in one of those $10 SC intake tubes! :D

Joe

[90scman]

how much are you looking to get for one of the running sc's. if you could give me details on those also it would be great. miles, colors, mods, new parts. Thanks don ps where are you located?

[youngfordfan61]

Hey,
If we can find out if it will interchange with my 93' you got 1 sold! I just dont know a way to find out, hope it works out! Anybody know if itll interchange? I see to you have cd wiring, is that to connect a stock cassette to the slave unit? If so is that the only wiring you need to run a slave unit? :)

[AMD[H]unter]

I don't really see anything I need here, but I do need a set of them ported manifolds for my '91. If I sent you my cores, what kind of time frame am I looking at to get them back, with you moving and all... Thanks!

[tbird88]

how much are you looking to get for one of the running sc's. if you could give me details on those also it would be great. miles, colors, mods, new parts. Thanks don ps where are you located?

I have one that I drove all the way up past Waco to Glen Rose to bring back home. Black w/Titanium cloth interior, automatic, needs a front bumper cover (got one I'm sure), drove it to the partshouse a few times in the past. Don't remember the mileage, it has an Indiana title.
700.00 - pic attached below

Other one is a running parts car, 65,000 original miles, less than 2,000 miles on rebuilt trans, new master cylinder. They ran it off in a culvert and trashed the front suspension, has a small crack in the oil pan. I welded the radius rods back together just to drive it around the yard, driverside window has been missing for over a year so the interior is funky. Local wrecker service I bought it from probably has the title.
600.00 - I have pics somewhere on my hardrive...

I'm just up the road in Beaumont ;)

Drop me an email, maybe both of them can have a new home. Will trade either or both for firearms/ammo.

tbird88@datarecall(DOT)net

thanks,

'bird

[tbird88]

unter']I don't really see anything I need here, but I do need a set of them ported manifolds for my '91. If I sent you my cores, what kind of time frame am I looking at to get them back, with you moving and all... Thanks!
Could be around 2 weeks, just got several orders for those, depends on whose cores show up first etc.

Keep your eyes open for more pics of parts, gonna slap 'em on here as often as I can and then update the thread.

thanks!

'bird

[CMac89]

Only if you lived closer to me I would buy one of those.

[speed95]

Wynn send me a email, Pm, or phone call and let me know what you want for the running SC's I might come take one or 2 off your hands.

Chris
iluv2speed95@aol.com

[Thomas A]

You have any poly diff mounts laying around Wynn??

Thomas

[tbird88]

You have any poly diff mounts laying around Wynn??

Thomas
No sir, got so labor intensive I couldn't get 'em exactly the way they needed to be. That, and I think I might've finally loosened up the one under Lola so didn't want to chance sendin' out something that would come back to haunt me such as replacing/refunding a dozen mounts.

Hopefully nobody mistreated theirs as bad as Lola did hers.

'bird

[tbird88]

Wynn send me a email, Pm, or phone call and let me know what you want for the running SC's I might come take one or 2 off your hands.

Chris
iluv2speed95@aol.com

Headed out to my NEW JOB and will do what I can to remember to email you tonight about them. Really a good deal, would be a waste to sell 'em locally because they're "just transportation" in this area.

'bird

[mc94xr7]

drive shaft?:eek:

[Rodeo Joe]

Wynn,

I'd be interested in one of those $10 SC intake tubes! :D

Joe
Bump! :cool:

Joe

[tbird88]

Bump! :cool:

Joe
Man, so sorry about missing your post! Taking off early to work this mornin', I'll send you details about the hose as soon as I can this evenin'.

thanks for hangin' in there!

'bird

[ThunderRoad]

How Much To Ship To 19030 Pa Need E-mail For Pay Pal Thanks OR IN AND OUT??

[SC Spyder]

Wynn, i've been trying to get in touch with you.

Please pm me about my order.

Doug

[Plat0ribs]

Patience is what I would suggest. Wynn may not be the fastest vendor (unless you're drag racing him, lol) but he's a lot more honest than most and his work is the shizzle!

Just keep reminding him and give him a chance to stick his head up for air and he'll take care of you.

Wynn,
Best luck in your new diggs, hope all's well with you.;)

[pablo59]

Wynn, I P.M.'d you about some 94/95 headers and a complete Y Pipe. Need to know if your got the P.M. I will be sending cores and $$$ as soon as you get back to me.

[SC Spyder]

I am trying to get in touch with Wynn, anyone got any suggestions?

Doug

[justnashty]

i didnt see this on there,but do u have the belt tensioner that goes on the alternator bracket of a supercoupe?

[SeanMatteson]

I have one that I drove all the way up past Waco to Glen Rose to bring back home.

Wynn,

What were you doing up in Glen Rose?! ...Figures, I spent weeks and weeks in Glen Rose on business this past year, and figured there's no way I could hook up with you and now I hear you at least passed through there. Damn.

Your new job isn't up in Glen Rose, is it?

Sorry for the hijack. ...Maybe reply to me via PM and let me know what the deal is. I may be back in Glen Rose again.

Cheers,

Sean

[victor malvar]

Hi Wymm,

Yep we know abouy those little critters out here also. We just leave em alone and they are o.k. Havent had em chase me yet.

I lost your new No. Call me about those 12 thingis + We spoke about. I know your busy give me a shout as soon as you can. Might need to double it.

Take it easy.
Victor.

www.spinningwheels-sc.com
spinningwheels-sc@earthlink.net
352-732-5013 If no anwer leave a Numer and you can just say Wynn.
That will do it. Thanks and Good Luck!

[90scman]

do you have a sc top, engine wiring harness for a 94 95 sc or a set of heads? let me no. don

[victor malvar]

Hi, Wymm, If you need any spealty items, let me know. I kwow during a move you can get things misplaced. So I can borrow some parts from the SC museum. I do have some hard to find parts. I will trade you on some cores etc. If there is anyway you could give me a idea on those 12 drag pipes and the other items I am ready to send you a bunch of the Stang shorty headers.
My budy can only do a couple at a time so If we can get something done faily soon let mr know If not. Let me know just the same these guys are just waiting for the exhaust to finish their engines before the hard winter sets in.
Let me know so I can tell them one way or the other. What kind of time line.

Thanks
Victor

[zbird1]

I love the manifolds you did for me there PERFECT but I need some more parts I need a wire harness for the DIS, coil pack, ect. for a 92 sc the one with the larger plug and I think it's called the t/v cable that goes from the TB to the tranny and if there is a bracket on the tranny end of the cable I need that to please let me know A.S.A.P. if you can get me the parts I'm running out of good weather. Do you have a new email or phone # I can reach you at . thanks zach.:)

[SC Spyder]

Just a note to let everyone know that Wynn is still with us. I received my mainfolds, down tubes and a note of appoligy from Wynn yesterday. Up to his knees with life but picking away at it.

So, if you are trying to contact Wynn or are waiting for parts, be patient.

Thank you again Wynn.


Doug

[SanDiegoLXBird]

This is probably a really stupid question, but I've gotta ask:

Do you have the ring on the bottom of a 94/95 shift boot? It's the part that meets up with the center console and sorta secures everything there. I removed my shift boot (because the leather was so tight it was causing the passenger front corner of my console to pull up) and I've lost the damn base to it. If anybody reading has one, I'll take it off your hands.

Thanks!

[rickbtbird]

Has anybody heard from Wynn lately?

[WiscoAndy]

i'd like the cam sensor assy.

[vance720]

could use the overflow res. I have a 94. will the one pictured fit or is there no difference in early vs late model SCs. ahow much to 30076

[snakesm13]

could you please send me some more information on the black SC Year, mileage, any problems with it. I am in waco and already own one SC that is down at the moment and im trying to talk myself out of it, but im itching to buy yours, i dont know how theres anyway to pass that deal up. so if you could send me some more info on it maybe we could do business.

thanx
shane

[refriedbeancoun]

I am looking for IRS parts. I am building a 65 Cobra Coupe and am using IRS.
Anyone?

[rickbtbird]

Did anybody get anything they ordered from tbird88. My Manifolds appear to be in LALA land.

[victor malvar]

Hello Guys,

Wynn is probably having some type of dificulties or pressures that is keeping him from answering us all. I know Wynn would not burn bridges he has to many friends here. As soon as I get a chance I will try to contact him. I will update this next week or sooner. I spoke with Wynn before he took on new responsibilities but who knows he could be sick or anything is possible. I myself have had times were I could not communicate with anyone for days.

I am not even supposed to be on my computer but when Diane goes outside or anywhere I sneek a peek at the messages. I have a few more things to that need to be taken care of and I will report back with some news if I find out anything or not. That is all I can say at the moment.

Take it easy!
Victor....

[radsc]

how much for crank sensor cam sensor o2 sensors map sensor egr valve position sensor for 89 5 sp

[rickbtbird]

I figured he's just too dame busy to read the message board. I got my 95 all apart doing mounts, exhaust and pulley sets. Working in my driveway isn't going to be fun if it starts to snow outside before I get the manifolds. But right now I’m at halt due to a sub frame motor mount bracket issue. I can't seem to find the correct bracket for the driver’s side and the one I just got off the 89 isn't the same style. Someone told me that the bracket style is the same for the newer N/A birds.. but I don't know because I can't source the part. This might be due to Ford selling them as a complete unit (lower bracket, mount, and upper bracket) under one part number for $110.00 per side.

[victor malvar]

I figured he's just too dame busy to read the message board. I got my 95 all apart doing mounts, exhaust and pulley sets. Working in my driveway isn't going to be fun if it starts to snow outside before I get the manifolds. But right now I’m at halt due to a sub frame motor mount bracket issue. I can't seem to find the correct bracket for the driver’s side and the one I just got off the 89 isn't the same style. Someone told me that the bracket style is the same for the newer N/A birds.. but I don't know because I can't source the part. This might be due to Ford selling them as a complete unit (lower bracket, mount, and upper bracket) under one part number for $110.00 per side.

Hi Try Autionfrontier on eBay. They have diffrent parts regularly. NOS Parts.
Good luck.

[87GrandNational]

Is the intercooler baffle still availabe? If so how much. Also, do you have a right power window motor? Thanks!!

[bachman17]

I need a good one. Color don't matter as long as it is not cracked or saggin. let me get a pic if possible. Also I need the two twist in light bulbs from a climate control unit.

[ZeroRain]

would you guys happen to have the bracket for the 5spd tranny mount?

[rickbtbird]

10 days before Christmas and still no word from Tbird88. It's been three months now. Maybe he's going to surprise me by send me my manifolds as a Christmas Gift.

[S_Mazza]

I don't think he's a bad guy, but he sure is hard to get a hold of. Good luck.

[victor malvar]

Hello to everyone. I know Winns No. I know where he works. I will leave a message for him. I do not want to invade his privacy. I know Winn pretty well there is a reason for him not replying. I am sure he has not replied due to unckwon cicustances we may all not be aware of. He will when he is ready to do so. I will try my best to see what's up but with respect to him and his welfare. If he does not want me to say anything due to his Job etc. It will remain as he wishes it to be. I will not even anwere wether I spoke with him or not if there is a reason for his wishes for me not to sau a word at this time I am mute. Some times we all assume things are are so far away from the actuality of circustances that we fail in giving things time to make the unknow known. When the time is right. He has alway been a straight up guy and I think he has reason for not being able to reply. Who knows why.I don't

Happy Holidays to all of you. He probably sends them as well.

[garsc]

Hey Looking for catless down tubes for a 94 5 spd Texas Tbirds price was good cant seem to find him. Any know a goog deal on these?:confused:

[rickbtbird]

Hey I'm a resonable guy. If he's have some issues now ok it's not a problem. Just a little communication is expected from time to time as no communication at all is never a good thing when parts and money is involved.

[victor malvar]

Hi Guys Yes I understand. I am not aware of persomal dealings that anyone may have with him. I will do my best to try to locate him. I will pass somethings along to him. God forbid...He maybe sick or who knows??. I will try him in a couple of days and hope I can comminicate with him. I would go to bat for Winn If he needed any help in anyway. I will do my best to get a hold of and explain this. He may not have access to a computer. All we can do guys is hope he is O.K. and will come back and explain it to everyone or maybe to me and then I could try to help him, or see what his situation might be at this time hang in there if you can. I can ask a buddy of mine to possibly take care of some of your needs. I am not a welder but I am connected with good companies that maybe able to assit you.

It is very rare that he would leave anyone stranded in anyway if there were not a good reason for his disapearance he would answer all of you guys and me. I will try as he is a friend as well as you guys are friends of his and maybe mine. I am willing to assist the best I can.
eMail me if I can be of any assistance to you.
Victor...
spinningwheels-sc@earthlink.net
352-732-5013

[txsc]

Any news regarding Wynn? I need a pair of 94/95 cat-less 2.25" down tubes. Now.

Thanks!

JD

[smms25]

Got any leather seats for sale... email smms25@aol.com

[victor malvar]

I Just spoke to a Header company that employs a good old friend of mine. I explained the dilemma of our cars not having a good Inexpensive header with the right Primaries and collector. I have also been speaking to another company who is willing to make the down pipes or the way to hook up a exhaust similar to what Winn was making. I have not wanted to get do what Winn did or take compete with Winn in any form. I see that he is not come back to the place were hi has so many friends me included. He must see these threads I am sure. He is a good friend. I would hate to start something then Winn comes back and I get stuck holding the bag! I would have to commit to 25 sets of headers. That's a few dollars to say the least. We are working on a price of around $400.00 maybe less. Then a couple of hundred dollars to get the rest of the exhaust pipes bent and made to fit out cars 1989 to 1995. These are for dual exhaust 2 1/4" or 2 1/2" I think 2 1/2" is a better size. This might require for some to replacement of some the gas tanks then maybe not....
Let me call my Exhaust pipe guy and see if he can get me a set price. I will get back to you soon tonight id I am not to late to call now it is after 5:00 pm. I will get back with everyone make up your minds the more we can order the more apt Iam to doing this.
Place yourself in my shoes!!! I do not need 25 sets of headers sitting around. I would hate a divorce at my age :rolleyes: :eek: !

Victor.....

[garsc]

Victor . Please let me Know what you come up with as far as downtubes and exhaust parts go. Feel free to call me or Pm me when you come up with a solution. Thanks Garry

[victor malvar]

Hi I just finished speaking with both companies.

1. I can get the tubing 2 1/2" or 2 1/4" Pipes made just like Winn used to do. Price is a few dollars more. This guy just bought a expensive machine and will cost us probably $25 to $35 more than Winns. The other is if you want cats they are extra. The Headers are made buy a good company but I need to send them a set of headers that they can look at for design purposes. The price will be aproximately $325.00 to me!!! So! I would add $32.50 to that price which is 10% for us we feel that's fair! We need to make a buck doing this or it's not worth it. Now for the rest of the exhaust It will depend on what you need. Resonator or not? Or pipes without resonator and just mufflers. Or all of the above. We can probabably get down tubes made as needed for some of you who need just the down tubes. I did not get a price on those. These are either S.Steel or the
Immitation S.Steel or the darker pipes ( I cant think of the name of this type of stainless Steel It's cheaper so they say.) Sorry for the rush job on this. There might be adjustments here or there. I will do my best to get this done if everyone feels good about it. Hope this helps some of you guys and girls out. I figure roughly about $700.00 plus shipping for the whole thing. I think that is not to bad. I paid a whole lot more for mine. We will try to improve on the slang and beat around the bush a little more!:rolleyes: :D
Victor.......

[victor malvar]

Got any leather seats for sale... email smms25@aol.com

Hi,

I can't eMail you I don't use your program. I may have a set that needs a little work other wise they are good! eMail me or call. I have another friend that needs my other set. Got seat covers just like they other guy does. Maybe a little cheaper.Unless your a team Member!:D :D :D :rolleyes:

With us you have to be a club member...

352-732-5013

[BirdofPrey97]

Hi I just finished speaking with both companies.

1. I can get the tubing 2 1/2" or 2 1/4" Pipes made just like Winn used to do. Price is a few dollars more. This guy just bought a expensive machine and will cost us probably $25 to $35 more than Winns. The other is if you want cats they are extra. The Headers are made buy a good company but I need to send them a set of headers that they can look at for design purposes. The price will be aproximately $325.00 to me!!! So! I would add $32.50 to that price which is 10% for us we feel that's fair! We need to make a buck doing this or it's not worth it. Now for the rest of the exhaust It will depend on what you need. Resonator or not? Or pipes without resonator and just mufflers. Or all of the above. We can probabably get down tubes made as needed for some of you who need just the down tubes. I did not get a price on those. These are either S.Steel or the
Immitation S.Steel or the darker pipes ( I cant think of the name of this type of stainless Steel It's cheaper so they say.) Sorry for the rush job on this. There might be adjustments here or there. I will do my best to get this done if everyone feels good about it. Hope this helps some of you guys and girls out. I figure roughly about $700.00 plus shipping for the whole thing. I think that is not to bad. I paid a whole lot more for mine. We will try to improve on the slang and beat around the bush a little more!:rolleyes: :D
Victor.......


When more set numbers are available let me know. Be happy to get a complete exhaust kit from you.

[victor malvar]

Hi I sure will. Up to now it is just you!

Let's see what happens. I appreciate your reply.


Have a good one day!

[pieman42]

how are ya? i need the eec computer for my 1990 5-speed. please let me know if you've got one, and how much. fast shipped to calgary, alberta ,canada t2e 3e1. thanks, keith

[rickbtbird]

He must see these threads I am sure. He is a good friend. I would hate to start something then Winn comes back and I get stuck holding the bag!Victor.....

According to Tbird88's profile, His "Last Activity was 12-11-2006 11:26 AM". He also doesn't answer his emails or voice mail. I tried to complain to paypal about the money I sent him but they said it's too late. Holding the bag, yea I know all about that.:mad:

[txsc]

Victor: PM to you.

Thanks,

JD

[chulosdream]

hey tbird88 i need to pay for my blower and to get it back
let me know thanks

[victor malvar]

how are ya? i need the eec computer for my 1990 5-speed. please let me know if you've got one, and how much. fast shipped to calgary, alberta ,canada t2e 3e1. thanks, keith

Hi Keith I have a few of those. Not cheap nor expensive., Fair price. Contact me. Email me My email address is all over this site.
spinningwheels-sc@earthlink.net
352-732-5013

[jmoore1540]

Would you have a lighting module for a '94 SC? If so how much with shipping to 23669? My interior lights stay on all the time and my headlights come on around 2 pm in the afternoon. My e-mail is jmoore1540@msn.com.
My home was originally Houston before I got into the USAF and got sent all over the world. but I still miss Texas!!

[TX91supercoop]

Do you have any black interior?Like a dash or seats?

[SC95Stang]

If those injectors are in good shape I could use them. What spray pattern? Stock 4 holes on the bottom?

[Toms-SC]

This is the second time Wynn has done something like this. I do not understand why people continue to risk money with an unreliable seller. :rolleyes: Sorry guys.

[gar429boss]

hello. do you have a good 90 short block for sale if so could you let me know Thanks (mawguthrie@hotmail.com)

[Rowdy36Sc]

do you still have the injectors and rail ?

[1vikfan]

Really want a 140 mph speedo. Dont have any of those, do you?

[SonySC]

Do you have a good Titanium leather passenger seat cushion cover? My dog shredded mine. George Clarke
SonySC@hotmail.com

[rickbtbird]

Looks like Tbird88 decided to burn this bridge all the way to ashes. I never got the items after paying for them. Also his site has been down for several month and the Domain Name is now unregistered. I’ve tried to call him several times prior to 2007 and there’s no answer, just a voice mail box. I highly recommend that if you have contact with him that you remind him of his previous responsibilities here.

[victor malvar]

Hi to everyone,

Sorry but I have been away taking care of some medical issues. I'm doing much better than I have been, so I am just looking around the forums.

I really thought Winn would have communicated with at least one of us but I was wrong. I'm sorry for those of you who may have lost any money since his disapperance. It's hard to believe he just left!!!

Before I took time off to take care of my health issues, I was working hard on an exhaust set-up that we all could use and afford. I am going to go back to the shop and get it going again. Since it doesn't look like Winn will be coming back any time soon, I think it's time to jump in.

I will get to the shop next week and get things going. We will keep you posted.

[ThunderDave]

Good to see you are back at it. :cool: I'll be in touch soon. ;)

[Jamez]

Assuming he is in the same country as you and you have the necessary information, just go to http://www.ic3.gov/ and file a complaint. I had to do so a while back and got my money back.

[rickbtbird]

Assuming he is in the same country as you and you have the necessary information, just go to http://www.ic3.gov/ and file a complaint. I had to do so a while back and got my money back.

Interesting, how long did it take for them to process it?

[ThunderRoad]

You Will Be Glad You Did It:)

[Flex]

Jamez,

Who from?

Victor,

How's the heart buddy? How you been? The exhaust thing sounds interesting. Care to share any details?

[rickbtbird]

You Will Be Glad You Did It:)
If it were me, the only thing that would keep me from communicating with customers I do business with would be if I couldn't get to a computer or a telephone. As a customer, I have to wonder why I have no status, no return calls, and why I don't have any value for my hard earned money with someone I've done previous business with.

For the $185.00 I'm out, it hardly seems worth contacting the IC3 but, I guess as a conusmer I have to do this in order to understand whether or not Wynn has a valid excuse for his actions. I’ll have to process a complaint and get some sort of status on what happen to my exhaust manifolds and money I sent to him.

If someone does indeed know what happen to Wynn please let me know otherwise I’ll be opening up a case with IC3 for investigation sometime soon.

[Jamez]

It was a guy at v6power.net I had purchased a t-lok from and never got. Took about a month and a half from when I filed to when I got a money order from the guy. I got either a call or email from the cyber crimes detective in that guys county about 2 weeks after filing to verify some things and let me know what was goin on.

[James Kanteraki]

Well i was looking to talk to you about other business and then found your moving sale post.

So now there are two things i'm looking for.

One is that mount for the differential with new polyeurethane in it. I don't know what its called exactly but on your website you had one with "cop bait orange" poly made up. -- you know that V shaped thing at the back end of the differential.

Seeing as you are in the middle of moving i'll take what ever color you've got lying around - however i would prefer black.
Do you want a core return on this?

And if you've got one of them i'd also take the gas pedal from the 5spd car.
Let me know what the cost for both is and i'll paypal you the money immediately.

If you don't have that differential mount, i'll just hold off on the pedal for a while, but let me know as soon as one of those mounts is ready.

Please and Thank you
James Kanteraki

Hope the move goes well.

[Flex]

James,
Have you not read the last few comments in this post?:confused: Wynn has disappeared for quite some time now and apparently left a handful of customers without product.

[James Kanteraki]

No i didn't read the whole thread - Thanks for the heads up.

but in any case, if he comes out of a coma or where ever he's been, maybe i'll get some parts.

know where i can get a rebuilt differential mount ??


Jim

[Flex]

James,

Does it have to be rebuilt or can you use one from a wrecked car?

[ThunderDave]

Yeah, Wynn moved and didn't leave a forwarding address. :eek: :confused: :(

[James Kanteraki]

Flex,
I was just looking to get one with new poly because i'm redoing the whole underside of the car. I have a several stockers that i've picked up over the years.

But thanks for the offer.

James

[snipescastle2]

Hi! I am looking for a SC IRS unit basically the Center section (pumpkin) both axles/spindles/brakes and all bolts and nuts from the attaching points to the subframe (I don't need the whole carcass) the weight of all the parts comes out to 90+ pounds, could you give me an estimate of what you charge me for these plus shipping to Warrensburg,Missouri 64093? If it is too much, I could possibly pick up.
Thanks!
Ben

[Toms-SC]

I want to give people money for nothing
Ben

Did you read ANYTHING in this thread?

[garsc]

Is There any way to kill this thread? Texas T-Birds is gone.

[rickbtbird]

What do you mean "Texas T-Birds is gone"?

[S_Mazza]

He means Wynn (tbird88) has disappeared from this internet forum and the TCCOA. There are several people that say he still owes them parts or money, but they cannot track him down. So this thread is a dead end.

If people are looking to buy parts, they should look at some more current threads. If people want to sell parts, they should (and probably do) have their own threads already.

[garsc]

Amen. May this thead rest in peace.......................

[rickbtbird]

I'd rather not consider this thread dead until I get some satisfactory answers or a resolution on my transaction with him.

[Flex]

What does he owe you?

[rickbtbird]

What does he owe you?
$135.00 + a set of 95 exhaust manifolds.

[Pablo94SC]

Let This Thread Die!!!!