Performance Parts

[explorer1]

I purchased these parts from a super coup enthusiast wanting to install them on my 1994 Ford Mustang V6. Unfortunately the cylinder heads do not fit. So my loss is your gain!

The parts include:
1992 ported cylinder heads, a lot of work has been done to the short turn radius on both the intake and exhaust. Also no valve train parts are included.

Comp Cam Stage 2 camshaft. This cam is a billet piece not a regrind.

ARP Headstuds for a Chevy V6, but fit better than ones for the Super Coup.

Ported Exhaust Manifolds. These have been ported to alittle over 2 inches at the flange and ceramic coated to over 1500 degrees.

Everything will be sold as a package. I will not separate the items!!

Asking price $650.00 shipping included or OBO.

[explorer1]

I also have 4 SC 16" Rims w/ Z-rated tires. I bought these used for my Ford Mustang but never used them since bolt pattern is different.

They are 245-50R-16, Fusion ZR-1

$500 shipping included or $350 plus shipping.

Tires not sold separately!

[trife86]

Where are you located?

[rzimmerl]

need some more closeups of the intake and exhaust ports, please

[explorer1]

I am located in Texas, I borrowed the digital camera so I can't have pics up till later tomorrow or some time this weekend. It might not be much but I did ride in the SC that had these parts installed and that thing was freak'n fast for a V6, I also heard what the cam sounded like through full magna flow exhaust, it was a very mild lope extremely subtle but a raped ape at full throttle.

[rzimmerl]

if these were installed on teh car what happened with the vavletrain?

[explorer1]

I wanted to see the porting, just the same as you. I helped the previous owner with disassembling the heads it was a PITA. I'm not sure if he still has the valves and springs, but he said that my stock valvetrain would work but he didn't mention that the heads don't work with the N/A blocks.

[Black93sc]

Hi - according to Super Coupe Performance's website, the cam specs you have displayed in the picture are for a STAGE 1 Comp Cam, not a STAGE 2.

Ted

[explorer1]

my bad thanks for the correction, however it still is a billet piece. Actually after checking Compcams.com its listed as the second cam they show, from mild to wild lifts, so hypothetically its a stage 2 cam according to there list, 5 cam variations are listed, so you could categorize them in stages.......but thats just me.

[95MustangSC]

if that stuff doesnt fit your car then there must be something seriously wrong with my mustang since i built my stock mustang block with sc top end

[kentv6]

I have to agree I built one two.The supercoupe heads will work on the 94' Mustang have you tried?

[explorer1]

I was under the impression that the water jackets don't line up causing extreme leakage or hydrolock. At this point I just want to sell the parts and get some of my money back.

[explorer1]

new price on wheels....$250.00 these are in excellent shape also I'm going to start breaking down the package here we go:

cam-250
heads-125
studs-50
manifolds-75

or 500 for all, I need o sell these parts, I also have a box full of SC engine parts ex: new alt, new dis, coil pack, steel idler's, port matched lower, 24,000 gvw tranny cooler with electric fan, intercooler & tubing and alot more. I'll take pics and post later today

PS wpip has dibs on some stuff.

JP

[rzimmerl]

still interested in heads, pending some more pictures

[explorer1]

BUMP....parts gotta go ASAP

[SC Spyder]

Do you still have the head bolts?

What is the part number please?

Doug

[Flex]

Hey dude,
I'll take the studs. Send me a Paypal account and a cost for shipping via the USPS.

[the-big-e]

I am interested in the heads.....

Who did the porting?

Can you send some more detailed pictures to: the-big-e@mindspring.com

[thundrburd]

do you still have the exhaust manifolds, what year car are they for ? how much do you want for them ?

[SC Spyder]

Did you sell these or not. As I posted, I'm interested just want to know the part #.

Doug

[explorer1]

manifolds are gone, still have heads and cam also studs.

300 shipped heads and cam.

I also have a full magnaflow exhaust res,3inch,Y,2 mufflers, and an Art Carr extreme transmission, 10.5 2500 stall, with HD tranny cooler and fan.

[Flex]

Joseph,

Already sent you the money for the studs. You should have had it by now.
The tracking number is LE 060 688 445 CA.

[Flex]

Joesph,
How much just for the cam?

[Flex]

Holy crap, just checked it myself. Took forever for it to get out.



Label/Receipt Number: LE06 0688 445C A
Status: Foreign International Dispatch

Your item left CALGARY, CANADA on November 3, 2006. Information, if available, is updated every evening. Please check again later.


So it's been in transit for only 4 or 5 days. I believe they told me it would take 6 days to reach you.

[Flex]

Hey buddy,

How you making out?

[eggtheplanet@ya]

since the manifolds were gone by the time i saw this thread, ill take the resonator if you'll sell it by itsself. im in tennessee 37917. i may want more of the exhaust too, i just need to check my funds........ argue with the mrs.

[rbrown]

Did you ever get more pics of the port work?

And who did the porting?

[Flex]

Hey buddy,

It's been about a month. No studs. Do you have a tracking number? What's up?

[Flex]

Joesph,

Starting to get a little concerned here. No reponse in over a month and no studs. How about a reply.

Branko

[rbrown]

Where in Texas is he?

[TwoToneThunder]

might as well make a post over in the feedback forum

[Flex]

Ok 40 days since our friend cashed my MO and still no studs, no response here on the board or to PM's which were full last time I tried. I have to believe I am yet another one that got taken.

Has anyone else bought my studs? Has anyone received anything ole Joe sold here?

TwoTone. What do you mean post in the feedback forum?

[Flex]

Has anyone received anything purchased from explorer1? Please respond. Thanks.

[Flex]

My faith in humanity is restored. The studs arrived today of all days. They were shipped on the 12th of December via Global Express Mail.

I don't know why explorer1 has not responded to the posts or pm's but I am thinking he must have a lot going on.

Joesph clear your pm's when you get a chance. Thanks.

[Sweet90SC]

So Flex are you saying this guy is trust worthy cause I myself am interested in a couple things as well as Eddie.(The-Big-E)
Rick

Oh by the way Flex is right Explorer you need to clean out your PM in box...must be busy christmas shopping...:D

[89SCK@t]

I want to know what part of tejas as well...if he is close enough I can get some parts from him.

[Flex]

My fellow SC brothers,

I live in Canada and explorer lives in the great state of Texas. We have never met. I cannot tell you from one transaction if anyone is trust worthy. He seemed very personable and decent and the bottom line is I received what he sold me.

The studs took a long time to come. I have been screwed 3 times on Ebay. Usually no item for a month or more is a good sign you will not get what you paid for.

I don't know what is going on with Joseph but he came through. Last year, my wife almost died and for a month while she was in the hospital, I wouldn't care if you burned my car to the ground. Sometimes life gets in the way of cars and parts.

What parts are you after? He had some heads that seemed to have a fair bit of clean up in the ports and chambers. Didn't seem like he was asking much for them either.

[Douglas Walker]

Mt your pm box. Ill take the head studs
Doug

[Flex]

Doug,
Read the whole post. I bought the studs.

[Sweet90SC]

ok how about the heads? still avail?
Rick

[Flex]

Rick,
Have you tried a PM? If you are really interested, I can give you his address to try to get a number. He may have sent it to me, I could check my emails.

You would need to get valves etc. but those should be upgraded anyways for a good buildup. The factory shiit should be lost in favor for some aftermarket larger stuff.

I have been looking at 7mm titanium valves or perhaps some 5/16 stainless. I think Intake should be between 1.9-2.0 and Exhaust 1.6-1.65. Might need a little unshrouding with the larger valves but easily done. Could represent a huge airflow gain.

[superklotz]

Do you still have the wheels and tires?

[rbrown]

--Hello?--

[Bacondoggy]

still have the exhaust from the res - back? where are you located? what are the rear mufflers?