Payton
Registered User
I was installing the SC on my friend's car. I got all the hoses, sensors hooked up. We started the car and it stalls right away.
I took the SC off, resealed plenum to the SC, reinstall it, paing attention to all the details, hoses, sensers and such. Started up, NFG. It can't build up boost, boost gauge goes to 10 on vacuum and back up to zero, car stalls. Couldn't keep it running with my foot on the gas.
Decided to run a code reader. It came with:
AC system is On during the test..
Purge valve failure
By-pass valve failure.
Need to pick you mind...car got my puzzled
I took the SC off, resealed plenum to the SC, reinstall it, paing attention to all the details, hoses, sensers and such. Started up, NFG. It can't build up boost, boost gauge goes to 10 on vacuum and back up to zero, car stalls. Couldn't keep it running with my foot on the gas.
Decided to run a code reader. It came with:
AC system is On during the test..
Purge valve failure
By-pass valve failure.
Need to pick you mind...car got my puzzled