PDA

View Full Version : Sc Dyno Day Intrest?

Broke Neck
10-05-2006, 01:21 AM
I was thinking about talking to Keinan over at ALL ASPECT if we could set up a dyno day over there and what kind of deal we could get.

Its a Dyno Jet, AWD dyno (not that the AWD part matters) and tends to read the most accurate from what Ive heard of all the dynos.

All Aspects is in Chesapeake off Battlefield near the locks, and Keinan is a pretty smart individual, some im sure we will get a very resonable deal.

Any interests?


I mean we could always go to Dyno Inc. :rolleyes: :D
nickleman60
10-05-2006, 07:15 AM
i think i'll stick with steen racing in norfolk,they were very knowledgable and knew how to run the dyno.as soon as i get my motor mounts put on i'm gonna line up a chip and tune with ed clark and finally see what kind of numbers i can make.as for dyno inc. i wouldn't take a tricycle to them after my first and only experience there,do you second that todd?
Roadhawg
10-05-2006, 04:20 PM
It may be just me, but Dyno Inc was not the best choice. When I get my 4.2L stroker done, I will most likely go to Steen and have Ed Clark do a retune.
Broke Neck
10-05-2006, 04:42 PM
I wasnt ruling out any other dyno places done get me wrong, Steen would be just as well, I was mainly thinking about parking though.

Ed does do wonders, but $150 an hour to tune is a bit much.

Im all for it, ill give Steen a call ... sometime in NOV good for everyone? Say a early Sat. morning.
nickleman60
10-06-2006, 07:41 AM
right now that sounds good i just have to make sure ed's available to do a chip and tune,hopefully i'll have the motor mounts on by then,300 rwhp here i come......lol
Broke Neck
10-07-2006, 01:23 AM
right now that sounds good i just have to make sure ed's available to do a chip and tune,hopefully i'll have the motor mounts on by then,300 rwhp here i come......lol

On the spray ... im hoping for 275ish on the spray. Unless ed can work his magic and tune my car with the tweeker I bought. ... then ill put the 125 in and ill be very upset if I only have 275HP.
nickleman60
10-07-2006, 08:09 AM
those numbers sound good,i hoping to get at least 25 hp from a chip and tune along with the mp inlet and double i/c.i think i should get 250-260 rwhp and if it's true about all the nitrous goes to the wheels then i should be a little over 300 rwhp,maybe 315-325 running a 75 shot.but all those numbers are coming from my mouth not the dyno so we'll see soon.....lol