E- Brake Adjustment

My brake light stays on , brakes are new fluid is normal and my abs works fine I knows has to be the emergency brake feels real sloppy to easy to pull up, is this easy to adjust? thanks guys TED

I'm not sure the light is caused by the emergency brake needing adjustment. Mine has needed adjustment badly before and never had a light. Anyway, adjusting the brake is an easy 5 minute job. Raise the rear end and you will see a adjustment point with a tension spring just to the rear of the diff. Pull out on the spring clip and the spring automatically adjusts the cable (make sure emer brake is off). After adjustment is taken up push the spring clip back into position. John

if ur brake light stays on its due to ur ABS. either your accumulator is going bad or your pressure switch is....