PDA

View Full Version : 95 4.6l 8 CYL with Bad oil filter leak?



pancake
11-06-2006, 09:28 PM
OK i reveiwed all the threads but they seem to apply to the 3.6 engine. Has anybody replaced the gasket or removed the oil filter assembly to replace a gasket . The oil filter/ cooler looks like it has a allen head/hex nut which holds the cooler to the block. Are there any other bolts to remove? Where can i get a gasket? Has anybody changed this on an 8 cylinder? to stop a bad oil leak? thx

Do you just unscrew the big hex nut? Can i slip a new gasket in in underneath. do i need to disconnect the oil pressure sending unit wire?

95scfan
11-07-2006, 01:44 AM
this happened on my v8 thunderbird its just a gasket leak and an easy fix i just went to o reily's and got the gasket they had to order it and it only took about 30 mins to put in i have a good pit crew:D
cody

racecougar
11-07-2006, 07:44 AM
There is quite a bit of info on this topic over at tccoa.com.

-Rod