AOD w/ 4r70 internals Q

ScrapSC

Registered User
Alrighty... I tore down the AOD and it looked to have some rather good parts in it. Clutches all looked good and not even looking worn. What I am wanting to do is put in the Mechanical Diode along with some parts out of the 4r70 that I have. I know I need the reverse drum but am wondering if the bearing that are already in my AOD will work. When I tore it down it had roller/needle bearings in it... Not really sure of the tolerances here.

Any help will be greatly appreciated.
Tranny already has the hardened input shaft and manual valve body along with the 9.5 P.I. torque converter..
 
Back
Top