Steering Rack Question

Scour_king

Registered User
Can anyone help me out with the correct size wrench and socket I will need to remove the rack from the car. I dont have anything that big and am not sure if it is metric or sae. Any help would make things alot easier because If i had 3 guesses all three would probaly be wrong.
 
I suppose you're referring to the 2 bolts/nuts which hold it to the sub frame? I think :confused: they might be 22 or 23mm. They are definitely metric.

However, for me, I had to make a special trip to the local swap-meet market to find a 1/2" drive swivel extension and 1/2" drive 2" extension to get to the nut.. because it just wasn't a common thing at the parts stores and besides... I'm cheap :rolleyes:
The bolt wasn't an issue. I think I just used an adjustable wrench to hold it steady. :cool:
 
Back
Top