No Low Beams

ThunderRoad

Registered User
HAVE COMPETION LIMITED HARNESS LOW BREMS STOPPED WORKING ALL OTHER LIGHTS OK HIGHS WORK ON HIGH BEAM SWITCH:confused:LOW BEAM BLUBS OK
 
If you have a Competition limited harness, the relay is where ever you installed it. Sounds like the wiring from the stock harness has come unhooked from the COMP harness. remember when you installed it, you took the wiring from the cars original lights on the drivers side and plugged them into the two plugs an the comp harness.
Tony
 
I made my own harness, so I am not familiar with the CL one's. The only picture of the CL harness I can find is this one, which shows the relays:

pic2.jpg


The fuse(s) if they exist, should be close to the relay(s).



Note
I just read this:

Competition Limited has developed a wiring harness using 14 gauge wire, 2 - 30 amp relays, and a pair of 20 amp fuseible links which connect directly to your battery.

You are now looking for a fusible link instead of a fuse.
 
[QUOTE You are now looking for a fusible link instead of a fuse.[/QUOTE]


No your not, for two reasons
1. you use the large fusible link on the solenoid that power was pulled from.
2. he has power to the low beams when the highs are being used.

I'm trying to scan the wiring diagram and post it for ya.

tony
 
No your not, for two reasons
1. you use the large fusible link on the solenoid that power was pulled from.
2. he has power to the low beams when the highs are being used.

I'm trying to scan the wiring diagram and post it for ya.

So they use one fusible link to power both hi and low? That's different.
 
Back
Top