View Full Version : Need help getting my car to run

11-26-2006, 01:02 PM
I got a 90sc 5sp, that I just changed the intake manifold gasket on and also the timing cover gasket. I got everything back together and it won't start. It cranks, its got spark (not very strong) its got fuel pressure, the injectors are pulsating. When I was intalling the intercooler, I accidentally touched the + side of the battery to the alternator, I don't know if I blew anything. I checked the fuses, they all look good. The car has 11 fusable links, maybe one of them blew? I don't know which one then. Any help would be appreciated.

11-28-2006, 05:46 PM
I'd check the cam sensor, you said you did the timing cover right? Start there and also check the crank sensor.

11-29-2006, 01:08 AM
I got it running, I had to reposition the cam sensor shaft-syncro: 1cyl. TDC and the shaft has to be in percise position, in the right tooth.
Thanks for the reply anyways