focus cai for sale

[supercharged95]

like the title says, focus cai+filter+ elbow if you wish to mount in the fenderwell(plastic piece in fenderwell will ned to be trimmed a little to fit cone)

$60+shipping obo
http://www.ecimulti.org/albums/album78/11engine.sized.jpg

http://www.ecimulti.org/albums/album78/13focuscai.sized.jpg

[supercharged95]

$50 shipped...

[supercharged95]

am i asking too much or should i just toss it in the trash?

[crich]

is it 3 inch diameter pipe??

[supercharged95]

The car is in the garage right now; once I have time I will go out and measure the exact diameter, but it is a direct fit for the stock throttle body/maf.

Thanks

[pablon2]

am i asking too much or should i just toss it in the trash?

Since you asked, I think the lack of response may be due to the fact that it is a rather unique CAI to our application (Focus?). Also, there is debate over CAIs that have a bend before the MAF like the MAC, and now Focus. The elbow may adversely affect air calibration.

[supercharged95]

Since you asked, I think the lack of response may be due to the fact that it is a rather unique CAI to our application (Focus?). Also, there is debate over CAIs that have a bend before the MAF like the MAC, and now Focus. The elbow may adversely affect air calibration.

Thanks for the feedback! I should add the 90 degree elbow was simply something I added on, would be included in the sale, but doesn't necessarily need to be used in the application. I used it to prevent the intake from sucking in the warm air generated by the engine and imo that is easier than making a heat shield. There are still plenty of threads available regarding the focus cai and if anybody is moderatly interested they can scroll to the bottom of this page and find most of them.
$50 is not much for replacement of the stock set up. You'll gain a helluva whine to the sc and pick up a few hp;)

[crich]

i cant tell in the pix but does it have the valve cover vaccum line hookup??

[supercharged95]

sure is
http://www.sccoa.com/forums/showthread.php?t=35176