Tim Groth
12-28-2006, 08:42 PM
Well I've decided to shift my directon with my SC's so my change of mind is my lose your gain. The majority of the items listed below were either purchased off here or have less than 12mos of use since purchased new. The car they were on was used mostly to take to events and then just parked in the mean time so I'd be suprised if I put 4k mileage wise on them since purchased.
1: Polished MPII (coated rotors) + MP inlet Plenum (polished) $850
Orginally purchased from ScrapSC in Feb. Again not even owned or used on my half for more then 12mos. Installed in June '06 - and removed after SC Shootout. Boosts 17lbs on my SC - gets it done :D . Won't disappoint.
2:Polished Pro Products 75mm Throttle Body - $150
Installed same time as above blower combo - purchased 12/05 - looks new.
3: 94/95 5sp Center Console Complete - $250
Purchased 9/05 from Mark McCormic on TCCoA for $325 - Complete unit with Top - Console - Ebrake. Grey with Black Top. Repainted black top with OEM matching paint, looks very nice - have pics if needed. Grey console has some holes filled on passenger side, was told this was from cell holder...never really messed with fixing or painting - pictures to come.
4: 6% and 10% aluminum quick change pulley - $175 Shipped
Purchased 8/06 from shotbirdsc for the above - only used to go to SC Shoot Out, at which time Fast Ed used the %10 on his bird to win his class. These bad boys work and a 5 min job to put on and to take off.
That's all for now - I will post more pictures when time allows. I have CDs full of everything I've done to my car before and after wise. Just let me know what you need to see and I'll snap a picture or post an exsisting.
Below is a picture of the parts at Carlisle '06 when installed prior to the show. Look just as nice today as they do in the picture.
http://www.mamn12.com/tim/42.jpg
Any Q's ask or send me a PM.
Thanks!
-Tim
1: Polished MPII (coated rotors) + MP inlet Plenum (polished) $850
Orginally purchased from ScrapSC in Feb. Again not even owned or used on my half for more then 12mos. Installed in June '06 - and removed after SC Shootout. Boosts 17lbs on my SC - gets it done :D . Won't disappoint.
2:Polished Pro Products 75mm Throttle Body - $150
Installed same time as above blower combo - purchased 12/05 - looks new.
3: 94/95 5sp Center Console Complete - $250
Purchased 9/05 from Mark McCormic on TCCoA for $325 - Complete unit with Top - Console - Ebrake. Grey with Black Top. Repainted black top with OEM matching paint, looks very nice - have pics if needed. Grey console has some holes filled on passenger side, was told this was from cell holder...never really messed with fixing or painting - pictures to come.
4: 6% and 10% aluminum quick change pulley - $175 Shipped
Purchased 8/06 from shotbirdsc for the above - only used to go to SC Shoot Out, at which time Fast Ed used the %10 on his bird to win his class. These bad boys work and a 5 min job to put on and to take off.
That's all for now - I will post more pictures when time allows. I have CDs full of everything I've done to my car before and after wise. Just let me know what you need to see and I'll snap a picture or post an exsisting.
Below is a picture of the parts at Carlisle '06 when installed prior to the show. Look just as nice today as they do in the picture.
http://www.mamn12.com/tim/42.jpg
Any Q's ask or send me a PM.
Thanks!
-Tim