Anyone ever replace their front hard brake lines?

quick35th

Registered User
I need to custome bend myself some new hard brake lines that would mimic the stock hard lines on the front of the car. I dont have these lines at all on my car so I need to know what diameter brake line to buy and about how much line I'll need to buy to do the front brakes only. The giant rear brake line is still on the car miraclously so I wont need it. FYI, I am using a conventional master cylinder rather then the traditional ABS master cylinder. I do already have the T block to run two lines to the front wheels. Any help is greatly appreciated.

Shane
 
The lines are all 3/16. My wifes 95 had metric ends and I had to put an adapter on them to get the right fitting.
I just had to replace all of the lines on that car, what a treat.
Alan
 
I'm going to be replacing ALL the lines on the SC project with Stainless Steel lines...but yes they are ALL 3/16"

You'll also need a DOUBLE flaring tool to get the lines to seal properly.
 
Back
Top